Home > Device Manager > Device Manager Reading My DVD Burner As CD-Rom

Device Manager Reading My DVD Burner As CD-Rom

Contents

If you get any prompts from User Account Control while accessing Device Manager, click Yes to continue. note: If the CD/DVD writing software that you use was purchased separately, uninstall the software, restart, then use its installation discs to install the software, then restart again. Make sure the disc type is compatible with both the computer burning the disc and the computer playing the disc (CD-R, DVD+R, etc.). However, the DVD still doesn't work and doesn't even recognise there is a disk in it!! http://xmailing.net/device-manager/device-manager-cannot-detect-the-device.php

YOU ROCK dj5!!! If you are using a desktop computer, continue to Check the drive cable connections. Enabling it disables all feature via Windows, but not 3rd party vendor software. Check is is set to enabled.

Dvd/cd-rom Drives Not In Device Manager Windows 10

Can't find your answer ? It's detected in My Computer as HD-DVD ROM.3. For a laptop, about $35.It's always worked fine. If it happens again, you will know what to do.

Figure : Select program to reinstall Follow the on-screen instructions to reinstall CyberLink Power2Go. TRY IT Helpful +2 Report xsile Apr 8, 2009 at 01:23 PM I bought a external burner and it plays everything just fine, however when I go to burn anything it Once you have checked the BIOS for problems, use the Hardware and Devices troubleshooter to check the hardware for problems. Dvd Drive Not Showing In Device Manager Windows 8 God bless you Report deep- Oct 11, 2012 at 05:39 AM thank you :) Report sudhe- Oct 12, 2012 at 12:10 AM thanku...:) Report Ian- Oct 24, 2012 at 09:43 AM

Logged gbbgTopic StarterGreenhorn Experience: Beginner OS: Windows Vista Re: DVD drive shown as CD ROM in Device manager - not working! « Reply #8 on: April 16, 2014, 02:35:04 PM » Dvd Drive Not Showing In Device Manager Windows 7 Sign up now. If your computer does not have this software decoder, to watch movies, purchase and install DVD and Blu-ray movie playback software that is compatible with your version of Windows. page That link totally fixed the problem.

This should fix the problem it worked for me pass this round View all 35 comments Report thess- Nov 23, 2008 at 07:42 PM Hi Jason, I used this process to No Dvd/cd-rom Drives In Device Manager Windows 10 The Dell provided applications will enable your computer with necessary codecs for such playback of movie DVD or Blu-ray discs. Report uzie- Nov 28, 2008 at 12:53 PM i have a problem with my dvd/cdrom it stopped working for some reason its doesnt play both dvd's and normall audio cd's,my laptop Do not worry you do not need to touch anything.

Dvd Drive Not Showing In Device Manager Windows 7

Make sure you have selected this exact key name. Install the updates according to the instructions on the download page. Dvd/cd-rom Drives Not In Device Manager Windows 10 Use the arrow keys to select Device Configuration, then press Enter. Dvd Drive Not Showing In Device Manager Windows 10 Refer to the Dell knowledgebase article Guide to Optical Disk Drives and Optical Discs.

did not fix my problem; it will check but will not run the auto repair. this content Here's what you do... When Windows opens, the drive is automatically configured, and the listing is restored in Device Manager. Figure : Find and fix problems in Control Panel Under Hardware and Sound, click Configure a device. Dvd Drive Not Reading Discs Windows 10

In the Run dialog box, type devmgmt.msc then press the Enter key. Wait about 20 seconds for the disc to achieve full spin velocity. Even though you may want to open discs through File Explorer or other software means, use the following steps to make sure AutoPlay is enabled so that discs can be more weblink This page requires Javascript.

Probably the best solution for that is clearing the upper and lower registry files in your Registry editor. Dvd Drive Not Working Ho DVD drive and cd drive is not detected even in the device manager. Step 5: Reinstalling the CD/DVD drive in Device Manager Use the following steps to remove and reinstall the drive name in Device Manager: Remove any discs that may be in the

I am having the same problem.

Visit now Z7_3054ICK0KGTE30AQO5O3KA30H4 hp-feedback-banner-portlet Actions ${title} Loading... It took about 2 hours of careful dismantling and reassembly with a whopping 5 seconds at the main event: cleaning the lense with alcohol and a cotton cloth. Right-click the CD/DVD/Blu-ray drive that is listed, and then click Uninstall. Dvd/cd-rom Drives Missing From Device Manager Windows 10 Turn off the computer, unplug all cords from the computer, then press the Power button for five seconds.

Delete all other UpperFilters and LowerFilters values within the 4D36E965-E325-11CE-BFC1-08002BE10318 key if any exist. Based on the show info, do one of the following: If error code 10, 19, 31, 32, 39 or 41 is shown in Device Status, a problem exists with the integration After CyberLink Power2Go has been uninstalled, restart the computer. http://xmailing.net/device-manager/device-manager-gone.php Use discs from different manufacturers and recording labels.

Refer to the User Manual of the disc recording software that you are using. If nothing happens or the computer stops responding, the laser is unable to read the initial startup information on the disc. Does the system see the drive at boot? Click Hardware and Sound, and then select AutoPlay.

A list of SATA numbers will appear. Select Computer in the main window. If they show up as disabled or with warnings, uninstall them and then go to "Action" then "Scan for Hardware Changes". If you are prompted for an Administrator password or confirmation, type the password or provide confirmation.

Open CyberLink Power2Go and verify that a drive name appears as the destination selection. Basically I am unable to burn cds or dvds but it did work before. Step 4: Reading a disc from a command prompt If your computer cannot read discs, confirm that the drive can read discs from a command prompt.